Neural Network Toolbox™

Allow neural network to change weights and biases on inputs

Syntax

• [net,Y,E,Pf,Af] = adapt(net,P,T,Pi,Ai)
  

To Get Help

Type help network/adapt.

Description

This function calculates network outputs and errors after each presentation of an input.

[net,Y,E,Pf,Af,tr] = adapt(net,P,T,Pi,Ai) takes

net	Network
P	Network inputs
T	Network targets (default = zeros)
Pi	Initial input delay conditions (default = zeros)
Ai	Initial layer delay conditions (default = zeros)

and returns the following after applying the adapt function net.adaptFcn with the adaption parameters net.adaptParam:

net	Updated network
Y	Network outputs
E	Network errors
Pf	Final input delay conditions
Af	Final layer delay conditions
tr	Training record (epoch and perf)

Note that T is optional and is only needed for networks that require targets. Pi and Pf are also optional and only need to be used for networks that have input or layer delays.

adapt's signal arguments can have two formats: cell array or matrix.

The cell array format is easiest to describe. It is most convenient for networks with multiple inputs and outputs, and allows sequences of inputs to be presented,

P	Ni x TS cell array	Each element P{i,ts} is an Ri x Q matrix.
T	Nt x TS cell array	Each element T{i,ts} is a Vi x Q matrix.
Pi	Ni x ID cell array	Each element Pi{i,k} is an Ri x Q matrix.
Ai	Nl x LD cell array	Each element Ai{i,k} is an Si x Q matrix.
Y	No x TS cell array	Each element Y{i,ts} is a Ui x Q matrix.
E	No x TS cell array	Each element E{i,ts} is a Ui x Q matrix.
Pf	Ni x ID cell array	Each element Pf{i,k} is an Ri x Q matrix.
Af	Nl x LD cell array	Each element Af{i,k} is an Si x Q matrix.

where

Ni	=	net.numInputs
Nl	=	net.numLayers
No	=	net.numOutputs
ID	=	net.numInputDelays
LD	=	net.numLayerDelays
TS	=	Number of time steps
Q	=	Batch size
Ri	=	net.inputs{i}.size
Si	=	net.layers{i}.size
Ui	=	net.outputs{i}.size

The columns of Pi, Pf, Ai, and Af are ordered from oldest delay condition to most recent:

Pi{i,k}	=	Input i at time ts = k - ID
Pf{i,k}	=	Input i at time ts = TS + k - ID
Ai{i,k}	=	Layer output i at time ts = k - LD
Af{i,k}	=	Layer output i at time ts = TS + k - LD

The matrix format can be used if only one time step is to be simulated (TS = 1). It is convenient for networks with only one input and output, but can be used with networks that have more.

Each matrix argument is found by storing the elements of the corresponding cell array argument in a single matrix:

P	(sum of Ri) x Q matrix
T	(sum of Vi) x Q matrix
Pi	(sum of Ri) x (ID*Q) matrix
Ai	(sum of Si) x (LD*Q) matrix
Y	(sum of Ui) x Q matrix
E	(sum of Ui) x Q matrix
Pf	(sum of Ri) x (ID*Q) matrix
Af	(sum of Si) x (LD*Q) matrix

Examples

Here two sequences of 12 steps (where T1 is known to depend on P1) are used to define the operation of a filter.

• p1 = {-1  0 1 0 1 1 -1  0 -1 1 0 1};
  t1 = {-1 -1 1 1 1 2  0 -1 -1 0 1 1};
  

Here newlin is used to create a layer with an input range of [-1 1], one neuron, input delays of 0 and 1, and a learning rate of 0.5. The linear layer is then simulated.

• net = newlin([-1 1],1,[0 1],0.5);
  

Here the network adapts for one pass through the sequence.

The network's mean squared error is displayed. (Because this is the first call to adapt, the default Pi is used.)

• [net,y,e,pf] = adapt(net,p1,t1);
  mse(e)
  

Note that the errors are quite large. Here the network adapts to another 12 time steps (using the previous Pf as the new initial delay conditions).

• p2 = {1 -1 -1 1 1 -1  0 0 0 1 -1 -1};
  t2 = {2  0 -2 0 2  0 -1 0 0 1  0 -1};
  [net,y,e,pf] = adapt(net,p2,t2,pf);
  mse(e)
  

Here the network adapts for 100 passes through the entire sequence.

• p3 = [p1 p2];
  t3 = [t1 t2];
  net.adaptParam.passes = 100;
  [net,y,e] = adapt(net,p3,t3);
  mse(e)
  

The error after 100 passes through the sequence is very small. The network has adapted to the relationship between the input and target signals.

Algorithm

adapt calls the function indicated by net.adaptFcn, using the adaption parameter values indicated by net.adaptParam.

Given an input sequence with TS steps, the network is updated as follows: Each step in the sequence of inputs is presented to the network one at a time. The network's weight and bias values are updated after each step, before the next step in the sequence is presented. Thus the network is updated TS times.

See Also

sim, init, train, revert

Provide feedback about this page

Functions — Alphabetical List

boxdist

© 1984-2009- The MathWorks, Inc.    -   Site Help   -   Patents   -   Trademarks   -   Privacy Policy   -   Preventing Piracy   -   RSS