| Simscape™ | |
Hydraulic Sensors and Sources
The Ideal Hydraulic Pressure Sensor block represents an ideal hydraulic pressure sensor, that is, a device that converts hydraulic pressure differential measured between two points into a control signal proportional to this pressure. The sensor is ideal because it does not account for inertia, friction, delays, pressure loss, and so on.
Connections A and B are conserving hydraulic ports connecting the sensor to the hydraulic line. Connection P is a physical signal port that outputs the pressure value. The sensor positive direction is from A to B. This means that the flow rate is positive if it flows from A to B.
The block has no parameters.
The block has the following ports:
Hydraulic conserving port associated with the sensor positive probe.
Hydraulic conserving port associated with the sensor negative (reference) probe.
Physical signal port that outputs the pressure value.
Ideal Hydraulic Flow Rate Sensor
Ideal Hydraulic Pressure Source
| Ideal Hydraulic Flow Rate Source | Ideal Hydraulic Pressure Source | |
| © 1984-2009- The MathWorks, Inc. - Site Help - Patents - Trademarks - Privacy Policy - Preventing Piracy - RSS |