Documentation Center 
Create significance versus gene expression ratio (fold change) scatter plot of microarray data
mavolcanoplot(DataX, DataY,
PValues)
SigStructure = mavolcanoplot(DataX, DataY, PValues)
... mavolcanoplot(..., 'Labels', LabelsValue,
...)
... mavolcanoplot(..., 'LogTrans', LogTransValue,
...)
... mavolcanoplot(..., 'PCutoff', PCutoffValue, ...)
... mavolcanoplot(..., 'Foldchange', FoldchangeValue,
...)
... mavolcanoplot(..., 'PlotOnly', PlotOnlyValue,
...)
DataX, DataY  DataMatrix object, matrix, or vector of gene expression values from a single experimental condition. If a DataMatrix object or a matrix, each row is a gene, each column is a sample, and an average expression value is calculated for each gene. 
PValues  Either of the following:

LabelsValue  Cell array of labels (typically gene names or probe set IDs) for the data. After creating the plot, you can click a data point to display the label associated with it. If you do not provide a LabelsValue, data points are labeled with row numbers from DataX and DataY. 
LogTransValue  Property to control the conversion of data in DataX and DataY from natural scale to log _{2} scale. Enter true to convert data to log _{2} scale, or false. Default is false, which assumes data is already log _{2} scale. 
PCutoffValue  Lets you specify a cutoff pvalue to define data points that are statistically significant. This value is displayed graphically as a horizontal line on the plot. Default is 0.05, which is equivalent to 1.3010 on the –log_{10} (pvalue) scale. 
FoldchangeValue  Lets you specify a ratio fold change to define data points that are differentially expressed. Default is 2, which corresponds to a ratio of 1 and –1 on a log_{2} (ratio) scale. 
PlotOnlyValue  Controls the display of the volcano plot without user interface components. Choices are true or false (default). 
SigStructure  Structure containing information for genes that are considered to be both statistically significant (above the pvalue cutoff) and significantly differentially expressed (outside of the fold change values). The fields are listed below. 
mavolcanoplot(DataX, DataY, PValues) creates a scatter plot of gene expression data, plotting significance versus fold change of gene expression ratios of two data sets, DataX and DataY. It plots significance as the –log_{10} (pvalue) from the input, PValues. DataX and DataY can be vectors, matrices, or DataMatrix objects. PValues is a clumn vector or DataMatrix object.
SigStructure = mavolcanoplot(DataX, DataY, PValues) returns a structure containing information for genes that are considered to be both statistically significant (above the pvalue cutoff) and significantly differentially expressed (outside of the fold change values). The fields within SigStructure are sorted by pvalue and include:
Name
PCutoff
FCThreshold
GeneLabels
PValues
FoldChanges
Note: The fields PValues and FoldChanges will be either vectors or DataMatrix objects depending on the type of input PValues. 
... mavolcanoplot(..., 'PropertyName', PropertyValue, ...) defines optional properties that use property name/value pairs in any order. These property name/value pairs are as follows:
... mavolcanoplot(..., 'Labels', LabelsValue,
...) lets you provide a cell array of labels
(typically gene names or probe set IDs) for the data. After creating
the plot, you can click a data point to display the label associated
with it. If you do not provide a LabelsValue,
data points are labeled with row numbers from DataX and DataY.
... mavolcanoplot(..., 'LogTrans', LogTransValue, ...) controls the conversion of data from DataX and DataY to log_{2} scale. When LogTransValue is true, mavolcanoplot converts data from natural to log_{2} scale. Default is false, which assumes the data is already log_{2} scale.
... mavolcanoplot(..., 'PCutoff', PCutoffValue, ...) lets you specify a pvalue cutoff to define data points that are statistically significant. This value displays graphically as a horizontal line on the plot. Default is 0.05, which is equivalent to 1.3010 on the –log_{10} (pvalue) scale.
... mavolcanoplot(..., 'Foldchange', FoldchangeValue, ...) lets you specify a ratio fold change to define data points that are differentially expressed. Fold changes display graphically as two vertical lines on the plot. Default is 2, which corresponds to a ratio of 1 and –1 on a log_{2} (ratio) scale.
... mavolcanoplot(..., 'PlotOnly', PlotOnlyValue, ...) controls the display of the volcano plot without user interface components. Choices are true or false (default).
Note: If you set the 'PlotOnly' property to true, you can still display labels for data points by clicking a data point, and you can still adjust vertical fold change lines and the horizontal pvalue cutoff line by clickdragging the lines. 
The volcano plot displays the following:
–log_{10} (pvalue) versus log_{2} (ratio) scatter plot of genes
Two vertical fold change lines at a fold change level of 2, which corresponds to a ratio of 1 and –1 on a log_{2} (ratio) scale. (Lines will be at different fold change levels, if you used the 'Foldchange' property.)
One horizontal line at the 0.05 pvalue level, which is equivalent to 1.3010 on the –log_{10} (pvalue) scale. (The line will be at a different pvalue level, if you used the 'PCutoff' property.)
Data points for genes that are considered both statistically significant (above the pvalue line) and differentially expressed (outside of the fold changes lines) appear in orange.
After you display the volcano scatter plot, you can interactively:
Adjust the vertical fold change lines by clickdragging one line or entering a value in the Fold Change text box.
Adjust the horizontal pvalue cutoff line by clickdragging or entering a value in the pvalue Cutoff text box.
Display labels for data points by clicking a data point.
Select a gene from the Up Regulated or Down Regulated list to highlight the corresponding data point in the plot. Press and hold Ctrl or Shift to select multiple genes.
Zoom the plot by selecting Tools > Zoom In or Tools > Zoom Out.
View lists of significantly upregulated and downregulated genes and their associated pvalues, and optionally, export the labels, pvalues, and fold changes to a structure in the MATLAB^{®} Workspace by clicking Export.
Load a MATfile, included with the Bioinformatics Toolbox™ software, which contains Affymetrix^{®} data variables, including dependentData and independentData, two matrices of gene expression values from two experimental conditions.
load prostatecancerexpdata
Use the mattest function to calculate pvalues for the gene expression values in the two matrices.
pvalues = mattest(dependentData, independentData);
Using the two matrices, the pvalues calculated by mattest, and the probesetIDs column vector of labels provided, use mavolcanoplot to create a significance versus gene expression ratio scatter plot of the microarray data from the two experimental conditions.
mavolcanoplot(dependentData, independentData, pvalues,... 'Labels', probesetIDs)
View the volcano plot without the user interface components.
mavolcanoplot(dependentData, independentData, pvalues,... 'Labels', probesetIDs,'Plotonly', true)
The prostatecancerexpdata.mat file used in the previous example contains data from Best et al., 2005.
[1] Cui, X., Churchill, G.A. (2003). Statistical tests for differential expression in cDNA microarray experiments. Genome Biology 4, 210.
[2] Best, C.J.M., Gillespie, J.W., Yi, Y., Chandramouli, G.V.R., Perlmutter, M.A., Gathright, Y., Erickson, H.S., Georgevich, L., Tangrea, M.A., Duray, P.H., Gonzalez, S., Velasco, A., Linehan, W.M., Matusik, R.J., Price, D.K., Figg, W.D., EmmertBuck, M.R., and Chuaqui, R.F. (2005). Molecular alterations in primary prostate cancer after androgen ablation therapy. Clinical Cancer Research 11, 6823–6834.
maboxplot  maimage  mainvarsetnorm  mairplot  maloglog  malowess  manorm  mapcaplot  mattest