Plot pole-zero map for I/O pairs of model
iopzmap(sys) computes and plots the poles and zeros of each input/output pair of the dynamic system model sys. The poles are plotted as x's and the zeros are plotted as o's.
iopzmap(sys1,sys2,...) shows the poles and zeros of multiple models sys1,sys2,... on a single plot. You can specify distinctive colors for each model, as in iopzmap(sys1,'r',sys2,'y',sys3,'g').
For model arrays, iopzmap plots the poles and zeros of each model in the array on the same diagram.
Create a one-input, two-output system and plot pole-zero maps for I/O pairs.
H = [tf(-5 ,[1 -1]); tf([1 -5 6],[1 1 0])]; iopzmap(H)
View the poles and zeros of an over-parameterized state-space model estimated using input-output data.
load iddata1 sys = ssest(z1,6,ssestOptions('focus','simulation')) iopzmap(sys)
The plot shows that there are two pole-zero pairs that almost overlap, which hints are their potential redundancy.