Send UDP packets over IP network
Simulink Support Package for BeagleBoard Hardware
Simulink Support Package for Gumstix Overo Hardware
Simulink Support Package for PandaBoard Hardware
Simulink Support Package for Raspberry Pi Hardware
Send a UDP packet to a network address identified by the remote IP address and remote IP port parameters.
The data type of the block input data is double.
Enter the address or hostname of the IP node on the remote device.
To broadcast the UDP message to all devices, use the default parameter value, '255.255.255.255'. Use this approach sparingly to avoid creating unnecessary broadcast traffic. Often, IP routers are configured to drop broadcast UDP packets sent to '255.255.255.255'.
The number of the IP port on the remote device, which can range from 1 to 65535. This value defaults to 25000.